Pickling & Deoxidizers

Removal of laser scale, weld scale, mill scale, and corrosion can be an expensive and time consuming operation, but it also critical for a high quality and corrosion resistant finished painted part.

Media blasting and manual grinding are options, but are expensive as they require significant part handling and labor. Chemical removal of these unwanted oxides is the easiest and most cost effective way to get the clean surface you desire.

Traditional pickles are notorious for creating sludge and scale and causing flash rust in spray systems. Strong mineral acids can fume and corrode surrounding equipment in open immersion systems.

Calvary Industries has optimized pickling and deoxidizer products to eliminate the sludge, scale, flash rust, fuming, and corrosion. These products are very effective, safer to use than traditional products, and in some cases even non-corrosive to operators. There is a deoxidizer for every substrate and application, with many products able to deoxidize more than one substrate through the same line at the same time.

Don’t have room for a pickle in your process? Not enough stages? Products are available to both clean the part of oils and soils, as well as remove the unwanted oxidation.

Followed by adequate rinsing, these parts can proceed directly into a finishing stage, whether it be zirconium treatment, iron or zinc phosphate, or chromate.

  DEOX 40R

Organic Acid Pickle With Detergent.
• Designed To Remove Laser Edge, Weld Scale, Rust, Oils And Soils.
• Non-Scaling/Sludging
• Minimizes Flash Rust
• Available In Non-Detergent
• Very Clean Operation
• Operation – Spray Or Immersion

Metal Safety – Ferrous And Non-Ferrous, Not Safe On Galvanized

  DEOX 37R

Organic/Inorganic Acid Pickle With Detergent Designed To Remove Laser Edge, Weld Scale, Rust, Oils And Soils.
• Non-Scaling/Sludging
• Minimizes Flash Rust
• Long Tank Life
• Available In Non-Detergent
• Very Clean Operation
• Operation – Spray Or Immersion

Metal Safety – Ferrous And Non-Ferrous, Not Safe On Galvanized

  DEOX 44NG

Inorganic Acid Pickle With Detergent.
• Designed To Remove Laser Edge And Weld Scale.
• Minimizes Flash Rust
• Long Tank Life
• Operation – Immersion

Metal Safety – Ferrous (And Aluminum/Aluminized With Additives)

  DEOX 76-2X

Inorganic Acid Deoxidizer.
• Designed To Clean And Brighten Stainless Steel.
• Also Available In A Gel.
• Operation – Immersion Or Manual

Metal Safety – Stainless Steel

  DEOX 1072

Organic Acid Passivator For Stainless Steel.
• No Nitric Or Chromic Acids
• Meets ASTM A967
• Non-Corrosive
• Non-Toxic
• Operation – Immersion

Metal Safety – Stainless Steel (Except 400 Series)

  DEOX 7

Inorganic Acid Deoxidizer.
• Designed Pickle Stainless Steel.
• Will Clean Weld And Heat Scale Areas.
• Operation – Immersion Or Manual

Metal Safety – Stainless Steel

  DEOX 113

Acid Deoxidizer/Brightener For Aluminum.
• Safe On Bright Polish Finishes.
• Fluoride-Free
• Operation – Spray And Immersion

Metal Safety – Aluminum

  DEOX 138

Acid / Detergent Blend For Etching And Cleaning Aluminum. 
• Provides Uniform Matte Finish.
• Low Fluoride Content
• Available In Non-Detergent
• Operation – Spray And Immersion

Metal Safety – Aluminum Extrusions And Most Casting Alloys

  DEOX 901

Neutral PH Deoxidizer For Steel.
• Removes Surface Rust.
• Prevents Flash Rust.
• Operation – Immersion

Metal Safety – Ferrous

  DEOX 6016

Brightener And Etchant For Aluminum.
• Non-Corrosive Replacement For Hydrofluoric Acid.
• Operation – Spray And Immersion

Metal Safety – Ferrous And Non-Ferrous

CONTACT NOW  

LEARN MORE   

We'd love to hear from you.

CONTACT NOW